SQUARE UHF
ANTENNA
0717a
v0.0
INSTRUCTION MANUAL
CONTENT
UHF antenna
INSTRUCTIONS
1
Select the area where you want to place the antenna:
OPTION A:
On a wall
Make punch marks.
Take into account the distance
between the antenna holes.
OPTION B: On a surface
Pass the cable through the middle of the support.
2
Connect the coaxial cable to the TV.
ANT-1550
Support
Drill with the help of a drill.
IInsert the antenna into the holder, matching the
Antenna holes with bracket parts.
Before using your new Steren product, read this manual to avoid
any malfunction.
The information shown in this manual is used as a reference on the product. Due to
updates there may be differences. Please refer to our website www.steren.com for the
latest version of the manual.
CAUTIONS
• This appliance is NOT intended for use by persons with different capacities, unless
properly prepared and supervised.
• This product is not a toy; Keep out of children reach.
• Do not use or store this product in dripping or splashing places.
CAUTIONS
Screws (x2)
Insert the plugs and screws. Remember not to
fully insert the screws, leave a reline of about
0.5 cm.
Place the antenna in a clear area, on a flat and stable
surface.
3
Perform a digital channel search on your TV. If necessary,
reorient the antenna.
SPECIFICATIONS
Specifications may change without notice.
Operating frequency: UHF: 470 – 862 MHz
Gain: 3 dB max.
Impedance: 75 Ohms
Anchors (x2)
Hang the antenna on the
screws.