Setup Menu - memorex renew MDF8402-LWD Manual Del Usuario

SETUP MENU

The Setup menu lets you customize this digital frame by allowing you to
select the source for your media files, set the effects between your photos,
adjust the speed of the Slideshow and more!
Use the following instructions to navigate and change the options which
are described on the following page.
1. Slide the Power switch on the rear
of this unit to turn it on.
This unit will either show the Main
menu or automatically start showing
a photo Slideshow (if the Auto Play
option in the Setup menu is set
to ON).
If the unit is in Slideshow mode,
press the EXIT button 1 twice to
exit and access the Main menu.
2. Select Setup using the Navigation
√, ®, π, † buttons 2; then press
the ENTER/PLAY button 3 to enter
the Setup menu. (NOTE: You can also access the Setup menu at any
time by pressing the MENU button.)
3. Use the Navigation π,† buttons 2 to select one of the Setup
options (i.e. "Select Card") on the two available pages of options,
then press the ENTER/PLAY button 3 to select it; the option will be
highlighted in blue.
4. Use the Navigation π,† buttons 2 to change the desired option
setting (i.e. choose between SD/MMC, Internal Flash, etc.), then
press the ENTER/PLAY button 3 to make the change.
5. Exit by pressing the EXIT button 1. (NOTE: You can also exit by
selecting the Exit Setup option.)
OPERATION (Continued)
CONTINUED ON THE NEXT PAGE
2
1
18
3