Battery Disposal - Petsafe PDT19-12484 Manual De Funcionamiento

interference that may cause undesired operation of the device.
This unit is in compliance with the limits found in RSS-310.
This Class B digital apparatus complies with Canadian ICES-003.
_____________________________________

Battery Disposal

Separate collection of spent batteries is required in many regions; check the
regulations in your area before discarding spent batteries. The Remote Transmitter
operates on one battery of the type Nickel Metal Hydride (NiMH) with a 7.2 Volt,
160 mAH capacity. The Receiver Collar operates on one battery of the type NiMH
with a 4.8 Volt, 120 mAH capacity.
At end of product life, use these battery removal instructions for fi nal
disposal of the battery pack.
• Using a number 1 Phillips screwdriver, remove the case screws.
• Remove the case back or cover.
• Remove the old battery pack.
Note: When removing the old battery pack, care must be taken when gripping the
connector fi rmly to avoid damaging the wires. Shorting the battery wires may cause fi re
or explosion. These instructions are not valid for repair or battery replacement. Replacing
6 www.petsafe.net