EDM 0-65857-19850-8 Instrucciones Importantes De Seguridad página 12

INSTRUCCIONES IMPORTANTES DE SEGURIDAD
03212
REF.
INSTRUÇÕES IMPORTANTES DE SEGURANÇA / IMPORTANT SAFETY INSTRUCTIONS
- In air dead angle, like the ceiling corner in the diagram 1.
- In the smoking meeting room, because smoke will cause alarm very easily.
INSTALLATION
- Press underpan and turn the underpan counterclockwise to make it separated from the alarm body.
- Place the underpan on the selected installation position, and use pencil make hole mark along installation
hole on the underpan.
- Use electric drill with 6,5mm drill bit to drill two installation holes (φ6,5; depth 35mm) on the mark.
- Strike plastic dilatant into installation holes, fix the underpan on installation hole with 3x30 screw with
gasket and tighten the screws.
- Fix in 9V cascading battery.
Make the holes on the alarm aim at the bulge on the underpan, press the alarm body on the underpan and
turn clockwise.
- When you need to unfix it to replace battery, you only press the alarm and turn the alarm body countercloc-
kwise.
WHAT TO DO WHEN FIRE OCCUR
- Dial telephone to the fire control office.
- Don't feel panic, keep calm. Go through the routeway planned in advanced and leave as quickly as possi-
ble, don't waste much time to take things.
- Feel whether the doors is hot or not. If hot, don't open the door; if not, you also should prevent the flame in
and you can chose other routeway to flee.
- With wet towel cover your mouth and nose, don't inbreathe smoke.
- After fleeing out, gather in the indicated place and ensure person is not injured or dead.
-12-