Warranty; Troubleshooting; Ec Declaration Of Conformity; Dc Aircube - Dustcontrol DC AirCube 500 Traducción Del Manual De Instrucciones De Servicio Original

DC AirCube 1200

Description Part No.
Pre-filter 42918
HEPA filter 42940
DC AirCube 2000
Description
Pre-filter
HEPA filter
Hose/sleeve/clamp 315 mm
Sleeve/bend 90° 315 mm
For spare parts, see the Dustcontrol

Warranty

The warranty period is two years and covers manufacturing defects. The warranty is valid on condition that the machine is used in
the normal way and receives the required service. Normal wear and tear is not covered. Repairs must be carried out by
Dustcontrol or personnnel authorized by Dustcontrol. Otherwise, the warranty is void.

Troubleshooting

Problem
Machine blows dust.
The machine only runs at maximum
speed.
Motor runs, but poor suction.
The fan does not start.

EC Declaration of Conformity

We hereby declare that DC AirCube is in conformity with the following Directives and Standards: 2006/42/EC, 2014/35/EU,
2014/30/EU, EN 60204-1:2018, EN1822-1:A1:2009.
Dustcontrol AB
Anna-Lena Berg / CEO
2021-05-05
20
Part No.
42917
42896
42657
42660
website.
Cause
Filter loose or damaged.
Rotary potentiometer/capacitor
defective.
Blocked filter.
Power supply not connected.
DC AirCube, Art.nr. 94178-H
Solution
Check and replace as
necessary.
Book service.
Clean or replace.
Connect power supply.
Peter Söderling / Technical Manager
2021-05-05