ION Wave Rider Guia De Inicio Rapido página 4

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Features
1.
Volume Down (-): Press this to
decrease the speaker volume on
Wave Rider.
2.
Volume Up (+): Press this to
increase the speaker volume on
Wave Rider.
3.
Previous (<): Press and release
this button to go to the previous
FM radio station or to skip to the
previous Bluetooth track. Press
and hold this button to seek
backwards for a clear FM radio
station.
4.
Next (>): Press and release this button to go to the next FM radio station or to skip to the
next Bluetooth track. Press and hold this button to seek forward for a clear FM radio
station.
Note: With some apps, pressing the Previous or Next button may go to another playlist
or music genre.
5.
FM Mode: Press this button to enter FM mode. Hold the button for 3 seconds to enter
FM Preset Creation mode.
6.
Bluetooth/FM LED: This blinks blue when Bluetooth pairing or illuminates solid blue
when connected to a Bluetooth device. When in FM mode, this LED is solid green and
blinks slowly when in FM Preset Creation mode.
7.
Bluetooth Button: Press this button briefly to begin Bluetooth connecting. Press and
hold this button to disconnect a paired Bluetooth device.
Press the Bluetooth button twice to enable or disable voice prompts.
8.
Charging Indicator: The LED will slowly blink when the battery needs to be charged. The
LED is solid red when the battery is charging. When the power is on and the battery is
fully charged, the red LED will turn off.
9.
Power On/Off: Press and hold this button to turn Wave Rider on/off. While Wave Rider is
connected to a power source, it does not need to be powered on to charge the battery.
Note: Wave Rider will power off after 30 minutes if there is a Bluetooth connection with
no audio playing. It will never automatically power off when in FM mode unless the
battery has no charge.
10. Play/Pause / Call Receive/End: In Bluetooth mode, press this button to play or pause a
track from a connected Bluetooth device. In FM mode, press this button to select a
previously saved preset station.
When Bluetooth-paired, press and release this button to answer a phone call. The
phone's ringtone will be heard through Wave Rider's speaker until the call is answered.
When the call has been disconnected, Wave Rider will resume playing music. To reject an
incoming call, press and hold this button.
Press and hold this button for 2 seconds to enable your connected smartphone's voice
assistant (e.g. Siri®, Google®, etc), and then speak into the microphone.
4
1
7
5
6
Note: If the front speaker grill fills with water, the
sound will be muffled until the water has drained.
2
3
8 9
10
4
11

Publicidad

Tabla de contenido
loading

Tabla de contenido