Technical Specifications; Performance Data Sheet - Hamilton Beach AquaFusion 87325 Manual Del Usuario

Filter capacity: 100 gallons (378 liters)/up to 5 months
Rated service flow: 0.15 Gal/min (0.57 L/min)
The replacement filter model number is 87325.
The system conforms to NSF/ANSI 42, 53, and 401 for the specific performance
claims verified and substantiated by test data.
The compounds certified under NSF/ANSI 401 have been deemed as incidental
contaminants/emerging compounds. Incidental contaminants are those
compounds that have been detected in drinking water supplies at trace levels.
Substance
NSF Standard 42 – Aesthetic Effects
Chlorine
Particulate Class I particles 0.5 <1 µm
NSF 53 – Health Effects
Cadmium (pH 6.5)
Cadmium (pH 8.5)
Cysts
Lead (pH 6.5)
Lead (pH 8.5)
Mercury (pH 6.5)
Mercury (pH 8.5)

Technical Specifications

Minimum temperature: 33°F (1°C)
Maximum temperature: 100°F (38°C)

Performance Data Sheet

While occurring at only trace levels, these compounds can affect the public
acceptance/perception of drinking water quality.
Do not use with water that is microbiologically unsafe or of unknown quality
without adequate disinfection before or after the system.
Systems that are certified for cyst reduction may be used on disinfected water
that may contain filterable cysts.
AquaFusion % Influent Concentration (mg/L)
Reduction
99% 2.0 mg/L ± 10%
98.6% minimum 10,000 particles/mL
0.0002 0.03 ± 10%
0.00022 0.03 ± 10%
99.99% > 50,000/L
0.00012 0.15 ± 10%
0.0002 0.15 ± 10%
0.0001 0.006 ± 10%
0.0001 0.006 ± 10%
% Reduction Requirement / Maximum
Filtered Concentration (mg/L)
≥ 50%
≥ 85%
0.005
0.005
99.95%
0.010
0.010
0.002
0.002
3