Wilks USA RX550i Manual De Operación página 4

RX550i
Unit Shut Down
01. Turn off the motor (push switch to the off position).
02. Unplug the unit from the power source.
03. Turn off the water supply.
04. Press the trigger of the gun to de-pressurise the system.
05. Engage the gun safety lock.
Ensure that the unit and hoses are fully drained of water.
Nozzles
0°Nozzle – Red (Fig.1): This nozzle delivers a pinpoint stream of pressurized water and is extremely
powerful. It should only be directed at surfaces that can withstand high pressure such as metal or
concrete.
15° Nozzle – Yellow (Fig.2): This nozzle delivers a powerful 15-degree spray pattern for intense cleaning
of small areas. This nozzle should only be used on areas and materials that can withstand very high
pressure.
Fig.1
25° Nozzle – Green (Fig.3): This nozzle delivers a 25 degree spray pattern for intense cleaning of larger
areas. This nozzle should only be used on areas that can withstand very high pressure.
White 40° Nozzle (Fig. 4): This nozzle delivers a 40-degree spray pattern and a less powerful stream of
water. This nozzle can cover a wide area and can be used for most general cleaning jobs.
Black / Blue Detergent Nozzle (Fig. 5): This nozzle is used to apply detergent and cleaning solutions.
This nozzle produces the weakest pressure of the three nozzles..
The nozzles are stored in receptacles on a panel mounted to the handle of the washer.
4
Fig.2 Fig.3
© Wilks-USA
English
Always turn off the
motor before turning off
the unit's water supply.
Failure to do so can
cause serious damage to
the motor.
Fig.4 Fig.5