Quick Start Guide - Wilks USA RX550i Manual De Operación

RX550i

Quick start guide

The following steps describe the quickest method to get your pressure washer up and
running. However, it is essential you fully read this manual to ensure you are familiar with
the general safety features, precautions and functions necessary to operate the product.
Failure to do so may result in injury and damage to your washer or personal items.
01. Pressure Washer
02. Water Hose (Not included)
03. Water Connection
04. Water Inlet
05. High pressure Hose
01. Attach the link hose to the hose reel and water outlet.
02. Connect the high pressure hose to the gun.
03. Attach the water hose to the water inlet (supply this washer with cold water only).
04. Connect one of the 5 coloured nozzles to the end of the gun.
05. Plug the washer into a power outlet.
06. Turn on water supply and hold the trigger on the gun until a constant stream of water flows.
07. Turn on the power to the unit.
08. Press the trigger on the gun to begin washing.
08
05
09
06
English
ASSEMBLY
07
06. Water Outler
07. Gun
08. Power Outlet
09. Power Switch
10. Link Hose
© Wilks-USA
10
01
03
04
02
3