LaserLiner LiveCheck Manual Del Usuario página 6

Danger area warning
Protection class II: The test device has reinforced or
double insulation.
Overvoltage category II: Single-phase consumers that
are connected to standard sockets, e.g. household
appliances, portable tools.
1
5
Before using the device, you should always test it
!
on a main circuit you know to be operational within
the specified voltage range.
To check sockets
Signal 1 Signal 2
(1)
Indicator active
Indicator not active
06
GB
Signal 3
(2) (3)
1 Signal 1
2
Signal 2
3 Signal 3
4 Earthing pin plug (rear)
2
3
5 Code key
4
Plug the device into the socket.
Make sure that the word TOP
is at the top.
Test result
Wiring correct
L / N reversed
L / (P)E reversed
N open
PE open
L open