Alarm Time Setting; Sleep Timer - Philips AE2380/00 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
AE2380/00.1n eng 28.10.1999 13:23 Uhr Seite 11

Alarm time setting

The set can be used as an alarm clock, whereby the buzzer
or radio is switched on at a set time.
1 Press ALARM SET.
and the alarm clock digits flash.
y
2 Press TIME ADJUST 3 or 4 to set the desired alarm time.
3 Press ALARM SET again or do not press any key for 5 seconds.
Alarm clock activation and deactivation
• Push the slider to ·BUZZ or ·RADIO to select the desired alarm
sound and to activate the alarm clock.
and either
y
current time.
• Push the slider to ·OFF to deactivate the alarm clock.
Notes: – If no key is pressed, the alarm clock will be switched
off after 1 hour.
– You can switch the alarm off for 24 hours by pressing
any key on the set.
– The beep tone of the buzzer will become louder after
10 seconds.

Sleep timer

The sleep timer is a set period of time before the set switches off.
1 Press SLEEP repeatedly within 5 seconds until the desired
sleeper time is displayed.
and either 120, 60, 30,10 or OFF are shown.
y
SLEEP
2 As soon as the desired time is displayed, do not press any key
again.
and the frequency and waveband of the current radio
y
SLEEP
station are displayed. After the chosen time has elapsed,
goes off and the radio switches off.
SLEEP
• To deactivate the sleep timer before the chosen time has
elapsed press POWER ON·OFF or SLEEP.
or
are displayed with the
FEATURES
11

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ae2380/05

Tabla de contenido