KR_SANDWICK-MAKER_FDK4_Mise en page 1 03/09/12 09:23 Page54
A Fixed plates with non-stick coating
pending on model)
A1 intersecting sandwich plates
A2 croque-monsieur / madeleine plates
B Thermo-insulating handle
The explanatory drawings are on page 88
Put the appliance on a firm surface.
Before using:
Fully unwind the lead.
Open the appliance.
Remove all packaging, labels or accessories from the inside and outside of the appliance.
Using your appliance
Close the appliance.
Check that the switch is set at 0.
Connect the lead to the mains. Set the switch (f) to on (position 1). The red light (d) comes
on (1).
Leave the appliance to pre-heat: the green light (e) comes on when the cooking temperature
has been reached (2).
Open the appliance and place the prepared items on the plates.
Close the appliance. The appliance locking clip adjusts to the thickness of the different
types of food (3).
Leave the food to cook for the required time.
When cooking croque-monsieur, it is normal for the green light to switch on and off
intermittently.
At the end of cooking, switch the appliance off by pressing 0. Then disconnect the plug.
Leave to cool for 2 hours.
Practical tips
The cooking time varies according to the humidity of the bread and the type of garnish
used.
In any case, it is advisable to check the cooking according to your taste.
When cooking has ended, remove the croque-monsieur using a wooden spatula.
54
DESCRIPTION
(de-
:
INSTRUCTIONS
C Locking clip
D Appliance switched on light
E Setting light
F Switch