Honeywell PB50 Manual De Instrucciones

Models PB50, PB50C, and PB51 Compliance Insert
For Users in the United States and Canada
Product documentation is available at www.honeywellaidc.com
La documentation du produit est disponible sur le site www.honeywellaidc.com.
Caution: This marking indicates that the user should read all included documentation before use.
Mise en garde: Ce marquage indique que l'usager doit, avant l'utilisation, lire toute la documentation
incluse.
Caution: For use with Intermec battery pack Model AB13 only. For power supply, use Intermec Model
AE19. No user-serviceable parts.
Mise en garde: Pour utilisation seulement avec bloc-batterie Intermec modèle AB13. Pour l'alimentation,
utilisez le modèle Intermec AE19. Il ne contient aucune pièce réparable par l'utilisateur.
The users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies
Corporation. The use of accessories other than those recommended, or changes to this product that are not approved by
Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user's
authority to operate the equipment.
FCC Digital Emissions Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the radio or television receiving antenna.
• Increase the separation between the computer equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is
connected.
• Consult the dealer or an experienced radio television technician for help.
Canadian Digital Apparatus Compliance
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Conformité aux normes canadiennes sur les appareils numériques
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouilleur du Canada.
Battery Information
Caution: The battery pack used in this device may ignite, create a chemical burn hazard, explode, or
release toxic materials if mistreated. Do not incinerate, disassemble, or heat above 100
Charge only with Intermec Model AC18. Do not short circuit; may cause burns. Keep away from children.
Use only Intermec battery pack Model AB13. Use of incorrect battery pack may present risk of fire or
explosion. Promptly dispose of used battery pack according to the instructions.
Mise en garde : Le bloc-piles utilisé dans cet appareil peut prendre feu, constituer un risque de brûlure
chimique, exploser ou dégager des substances toxiques s'il est manipulé de façon inappropriée. Ne pas
jeter au feu, démonter ou chauffer à plus de 100
Intermec modèle AC18. Ne pas court-circuiter; cela pourrait causer des brûlures. Garder hors de la
portée des enfants.
N'utiliser que le modèle de bloc-piles Intermec AB13. L'utilisation d'un mauvais bloc-piles pourrait
constituer un risque d'incendie ou d'explosion. Mettre rapidement au rebut tout bloc-piles usé,
conformément aux instructions.
° °
C (212 F). Rechargez uniquement avec le chargeur
° °
C (212 F).