Parts & Assembly; How To Operate - Homecraft HCCWK6WH Manual De Instrucciones

PARTS & ASSEMBLY
PARTS
Spout
Kettle
Base

HOW TO OPERATE

Before using for the first time, it is recommended that you clean
your COLLAPSIBLE WATER KETTLE. Simply boil a full kettle of water
and then discard the water. Repeat process once more.
1. First, find a flat surface near an electrical outlet before starting.
Make sure your cord is away from any water source.
2. To fill kettle with water, remove Lid, and fill with desired amount of water.
CAUTION: If water exceeds the MAX line (.6 liter) of water, the
boiling water may spill out during the boiling process.
3. Close the Lid.
4. Plug the power cord into an electrical outlet, then turn the control knob to the position you
want. To Boil water, turn to "Boil" position. There is also Honey, Keep Warm and Tea/Coffee
settings.
NOTE: The kettle will switch off automatically once the water has
boiled. You can shut off power by turning the control knob to the
OFF position at any moment during the boiling process.
5. When water is done boiling, pour the water from the Spout by lifting the kettle using the
Handle. Take care not to touch the body, as it will be hot.
CAUTION: Use caution when pouring boiling water from your
kettle, as boiling water may result in scalding.
5
Lid
Handle Lock
Release Button
Control Knob
Handle