Helpful Tips; Boil-Dry Protection; Cleaning & Maintenance - Homecraft HCCWK6WH Manual De Instrucciones

6. The kettle will not re-boil water when finished. Turn the control knob
to the Boil position to begin the boiling process again.
7. When done using, unplug the power cord from the electrical
outlet. Power cord stores conveniently in the Base.
8. To collapse your water kettle, switch both locks on the
handle to the "unlock" position while simutaneously
turning the handle right to fold the handle down.
Once the handle is down, push the kettle down.

HELPFUL TIPS

BOIL-DRY PROTECTION

As a safety measure, your COLLAPSIBLE WATER KETTLE is eqipped with boil-dry protection.
Should you accidentally operate the unit without water, it will automatically switch off. If
this occurs, allow the kettle to cool before filling with cold water and then boil the water.
KETTLE AND BLUE INDICATOR LIGHT DO NOT WORK
Make sure that the power cord is plugged into a working electrical outlet.
Water or debris on the bottom of the kettle may interfere with the functioning
of the kettle. Be sure the bottom of the kettle is dry and free of debris.
CLEANING & MAINTENANCE
1. Make sure appliance is turned off, unplugged and completely cooled before cleaning.
2. Wipe the exterior of the kettle with a damp, non-abrasive cloth, taking
care to avoid all electrical components. Use a soft cloth to dry.
3. Wipe the interior of the kettle with a wet, non-abrasive cloth or
sponge and dry thoroughly with a soft, non-abrasive towel.
NOTE: To protect against electrical shock and damaging the
appliance, do nto immerse the cord, plug or unit in any liquid. Never
place any parts in the dishwasher. Always wash by hand.
Mineral Deposits / Decalcifying
Minerals found in water, such as calcium and limestone, may leave
deposits in your kettle. It's recommended that you occasionally
clean the mineral deposits from the interior of your kettle.
1. To clean the mineral deposits from the interior of your kettle, fill
the kettle with 3 cups of white vinegar and the remainder with
water. Allow the mixture to sit overnight. DO NOT BOIL.
2. Empty the solution from the kettle.
3. Any stains remaining inside the spout can be removed by
rubbing with a damp, non-abrasive cloth.
4. Lastly, fill the kettle with clean water, bring to a boil, and then discard. Repeat once more.
Now your COLLAPSIBLE WATER KETTLE is ready to use again!
6