MTX IoT-XS Guía De Usuario página 17

Status
Status
UICC interface
Antenna
Power on/off, Reset
Power on/off
Software Reset
Hardware Reset
Características especiales
Antenna
MTX-IoT-XS | 2021/04
MTX © by MATRIX ELECTRONICA S.L.U.
SUPPORT: iotsupport@mtxm2m.com | SALES: info@mtxm2m.com |
LED to indicate network connectivity status
LEDs to indicate network coverage status
Supported chip cards: UICC/SIM/USIM 3V, 1.8V
50 Ohms. GSM/UMTS main antenna
Automatic switch-on at power supply
Switch off by AT command
Switch off by hardware signal TURN_OFF
Automatic switch-off in case of high temperature or voltage conditions
Orderly shutdown and reset by AT command
Emergency reset by hardware
SAIC/DARP
Rx diversity (receiver type 3i – 64-QAM)/MIMO
mtxm2m.com
17