Quick Start Guide - Wilks USA RX510 Manual De Operación

RX510

Quick Start Guide

The following steps describe the quickest method to get your pressure washer up and running.
However, it is essential you fully read this manual to ensure you are familiar with the general safety
features, precautions and functions necessary to operate the product. Failure to do so may result in
injury and damage to your washer or personal items.
ASSEMBLY
Insert the cable tidy hook into the machine
1. Fit the handle by aligning the screw holes at the
base of the handle to the top of the washer unit.
Tighten the two screws.
2. Fit the wheels by sliding the fitting into the sockets
on the side of the washer until they lock securely.
3. Slide the hose tidy onto the back of the unit.
English
1. Pressure cleaner
2. Water supply hose
3. Water connection
4. Water inlet
5. High pressure hose
1. Attach the high pressure hose to the pressure water
outlet of the machine.
2. Attach the spray gun to the high pressure hose.
Prior to operating the machine please ensure
that the high pressure hose has been completely
uncoiled and do not allow it to recoil during
operation.
3. Mount the lance onto the spray gun and add your
desired nozzle.
4. Connect the machine to the water supply hose and
power supply.
5. Turn on water supply.
6. Turn on washer after water has entered the unit.
© Wilks-USA
CONNECTION
6. Water outlet
7. Spray gun
8. Power outlet
9. ON/OFF Dial
* No. 2, 3, 8 are not included
3