Xtech MALLOY XTS-621 Guía De Instalación Rápida página 4

5. Volume -/Previous track: Press this button briefly to play the previous track.
Press and hold this button to decrease the volume level.
Note: This button is not active in Auxiliary mode.
6. Charging LED indicator
Status
When the battery is fully charged
When the battery is charging
7. Bluetooth LED light
®
• The LED light blinks in blue to indicate that the device has entered into the
pairing mode and is ready to be detectable for the first time.
• The LED light glows solid blue to indicate that the device is successfully
paired, or when the audio is paused.
• The status LED light blinks slowly in blue while streaming music in all
available modes (BT, USB, Micro SD™, Aux. in and FM).
8. DC 5V Micro USB charging port: Charges the built-in battery of the speaker.
9. USB port: Use it to play audio files stored in a USB flash drive.
LED indicator
The LED light turns off
The red LED lights up
10. Auxiliary input port: Allows the connection of any device equipped
with an auxiliary 3.5mm audio connector (for wired playback).
Note: The 3.5mm auxiliary cable needs to be plugged in this port when
using the speaker in FM mode to have a better FM signal reception.
11. Micro SD™ (TF) memory card: Allows music playback from
compatible media files stored in a Micro SD™ (TF) memory card.
12. Carrying string for easy transport.
IV. Charging the speaker
• Plug one end of the supplied Micro USB cable into the speaker Micro
USB port and the other end to the USB port of your computer, laptop or
AC adapter to charge the battery.
• Make sure that your portable speaker is fully charged before using it for
the first time.
• The battery will take about 6 hours to fully charge.
• While charging, the LED is solid red. When the battery has reached full
capacity, the LED light will turn off.