How To Use Basic Functions - Danby RG51G/CEFU1 Manual De Instrucciones

How to Use Basic Functions

Basic operation
ATTENTION! Before operation,
please ensure the unit is plugged
in and power is available.
COOL Mode
1
1. Press the MODE button to select COOL
mode.
2.
Set your desired temperature using the
or TEMP
TEMP

3. Press FAN button to select the fan speed:
AUTO, LOW, MED or HIGH.
4. Press the ON/OFF button to start the unit.
SETTING TEMPERATURE
The operating temperature range for
units is 62-86°F(17-30°C ). You can
increase or decrease the set temperature
1 °F(1°C) increments.
2
4
3
button.

AUTO Mode
1
In AUTO mode, the unit will automatically
select the COOL, FAN, or HEAT operation
based on the set temperature.
1. Press the MODE button to select AUTO.
2. Set your desired temperature using the
or TEMP
TEMP

3. Press the ON/OFF button to start the unit.
FAN SPEED can't be set in AUTO mode.
NOTE:
In AUTO mode, the unit will automatically
select the COOL, FAN, HEAT or DRY function
based on the set temperature.
1. Press the MODE button to select AUTO.
2. Set your desired temperature using the
or TEMP
TEMP

3. Press the ON/OFF button to start the unit.
FAN SPEED can't be set in AUTO mode.
NOTE:
09
2
3
button.

button.
