POWERING ON/POWERING OFF THE UA845 Last powered on To avoid damaging internal components, the UA845 amplifier should be the last component in your system to be powered on. First powered off To avoid damaging internal components, the UA845 amplifier should be the first component in your system to be powered off.
BEDIENELEMENTE UND STECKVERBINDER .........................22 SYSTEMINSTALLATION ................................23 ANSCHLUSS DER EMPFÄNGER .............................24 LIZENZ- UND GARANTIEINFORMATIONEN ..........................26 ESPAÑOL SISTEMA DE DISTRIBUCION DE ANTENAS MODELOS UA845 .....................28 CONTROLES Y CONECTORES ..............................29 INSTALACION DEL SISTEMA ..............................30 CONEXION DE RECEPTORES ..............................31 ESPECIFICACIONES .................................33 INFORMACION RESPECTO A LICENCIA DE USO Y GARANTIA ...................34 ITALIANO SISTEMA DI DISTRIBUZIONE AD ANTENNE MODELLO UA845 ....................35...
! IMPORTANT SAFETY INSTRUCTIONS ! READ these instructions. USE only with a cart, stand, tripod, bracket, or table KEEP these instructions. specified by the manufacturer, or sold with the HEED all warnings. apparatus. When a cart is used, use caution when FOLLOW all instructions.
! WICHTIGE SICHERHEITSHINWEISE ! Diese Hinweise LESEN. NUR in Verbindung mit einem vom Hersteller angegebenen oder mit Diese Hinweise AUFHEBEN. dem Gerät verkauften Transportwagen, Stand, Stativ, Träger oder Alle Warnhinweise BEACHTEN. Tisch verwenden. Wenn ein Transportwagen verwendet wird, beim Alle Anweisungen BEFOLGEN. Verschieben der Transportwagen-Geräte Einheit vorsichtig vorgehen, Dieses Gerät NICHT in der Nähe von Wasser verwenden.
! ISTRUZIONI IMPORTANTI PER LA SICUREZZA ! EGGETE queste istruzioni. USATE l'apparecchio solo con carrelli, sostegni, treppiedi, CONSERVATE queste istruzioni. staffe o tavoli specificati dal costruttore o venduti insieme OSSERVATE tutte le avvertenze. all'apparecchio stesso. Se usate un carrello, fate attenzione SEGUITE tutte le istruzioni.
NOTE: This connector does not work for Shure UC4 Receivers. 12 Vdc OUT Connectors. These power connectors are ANTENNA IN Ports, Channel A & B. BNC-type connectors designed to power up to four (4) Shure UC4 Wireless sys- for antennas. tems.
RF performance of the system by moving the antennas to the front UA845 in the rack. Once in the rack, it is more difficult to insert the of the rack. When a unit is located in a rack, antennas should be either front- bulkhead adapters and connect the antenna cables.
4. To power Shure UC4 receivers, connect the power input ports of the UC4 2. Using the supplied power cable, connect the UA845 to a power outlet. receivers to the 12 Vdc OUT of the UA845. Up to four UC4 Receivers 3. To daisy-chain UR4 Receivers together with Power OUTPUT cables, con- can be powered.
Página 12
(5) receivers can be powered from a single UA845. Dai- and B of one UA845 to the ANTENNA INPUT, channels A and B, of a sy-chaining multiple UA845's through the Power OUTPUT ports will overload a single power supply, possibly causing damage to UR4 receiver, a UC4 receiver, or a second UA845.
....15 W per unit typical. When used with 4 UC4's, 55 W max. Certification UA845: LISTED by UL and CUL (U.S. and Canada), IC and FCC; IC Certified (Canada). Meets applicable European directives for CE marking eligibility. VDE GS-Certified. Meets Requirements of EMC Standard and 301 489 Parts 1 and 9.