GETTING STARTED
CHANGE CLOCK FROM 12-HOUR TO 24-HOUR FORMAT
After the time has been set, the clock can be toggled
1.
between 12-hour and 24-hour format by pressing and holding
the CLOCK button for more than 2 seconds.
INSTALLING THE WATER FILTER
Remove the filter pod from the packaging.
1.
Soak the pod in a cup of fresh water for 15 minutes.
2.
Install the filter pod into the water filter housing, and close the
3.
housing until it snaps.
Place the water filter housing into the water reservoir.
4.
After about 30 days of use, the display will show WATER
5.
FILTER as a reminder that it is time to replace the water filter.
To reset the WATER FILTER reminder, turn the Mode Selector
6.
Bezel to CLEAN mode. Then, press and hold the ZERO
button for 5 seconds.
15 min.
11