Care And Maintenance; Troubleshooting; Corrective Action; Warranty - Kobalt KAL124B-03 Manual Del Usuario

CARE AND MAINTENANCE

All maintenance should only be carried out by a qualified service technician.
Cleaning
Before cleaning or performing any maintenance, remove the battery pack from the tool. For
safe and proper operation, always keep the tool and its ventilation slots clean.
Always use only a soft, dry cloth to clean the plastic transparent cover; never use detergent or
alcohol. Always wear safety goggles when cleaning tools with compressed air.

TROUBLESHOOTING

WARNING
• Press the ON/OFF switch to turn off the area light, and remove the battery pack from the tool
before performing troubleshooting procedures.
PROBLEM
The area light does
not work.

WARRANTY

For 5 years from the date of purchase, the tool is warranted for the original purchaser to be
free from defects in material and workmanship. This guarantee does not cover damage due
to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or
expendable parts and accessories expected to become unusable after a reasonable period of
use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at
no charge. This guarantee gives you specific legal rights, and you may also have other rights
that vary from state to state.
POSSIBLE CAUSE
1. Low battery charge.
2. The area light has
stopped working to
protect internal circuits

CORRECTIVE ACTION

1. Charge the battery pack
2. Turn off the area light, wait for the
tool and battery to cool down, then
and start the tool again.
10
Printed in China