Luminance Brands Kathy Ireland Home HIGHPOINTE LED CF205LBQ01 El Manual Del Propietario página 23

FOR FANS WITH PULL CHAINS: For your Fan/Light
Control to operate properly, the Fan Pull Chain Switch
must be set to operate the Fan at HIGH Speed, and
the Light Kit must be switched to ON position. To avoid
accidental Pull Chain use, shorten Chains.
8.4
When power is restored, push and hold the Fan OFF
Button ( ) for 3 to 5 seconds to set the Code in the
Receiver (Figure 37).
NOTE: The Ceiling Fan Lights (if installed) will Blink
to indicate the Transmitter has been paired with the
Receiver.
To turn the Ceiling Fan OFF, press and release the Fan
OFF Button ( ).
8.5
The Remote Control is designed to separately control
your Ceiling Fan Speed and Light Intensity (Figure 38).
There are Four Push Buttons ( . , .. , ... , .... ) to set the
Fan Speed.
POWER INDICATOR
LIGHT
FAN OFF
BUTTON
Figure 37
POWER INDICATOR
LIGHT
Figure 38
23
HIGH TO LOW
BUTTONS
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
U.L. Model No.: CF205L-1