Care And Cleaning; Troubleshooting - HAMPTON BAY 19854-000 Guía De Uso Y Cuidado

Installation
4
Installing the shade and light bulb
Remove the pre-assembled
assembly (A). Install the shades (B) to the xture assembly (A),
then secure with the socket ring (C) using the sleeve (EE).
Install four 60 watt type A light bulbs or CFL or LED equivalent
(not included).
DO NOT EXCEED RECOMMENDED WATTAGE..

Care and Cleaning

Clean the unit with a soft, dry cloth.
Do not use any cleaners with chemicals, solvents, or harsh abrasives.

Troubleshooting

Problem
The bulb will not light.
The fuse blows or circuit breaker
blows when the light is turned on.
(continued)
socket rings (C) from the xture
Possible Causes
The bulb is burned out.
The power is off.
The circuit breaker is off.
There is an exposed wire.
Solutions
Replace the light bulb.
Ensure the power supply is on.
Ensure the circuit breaker is in the ON position.
Discontinue use of the lamp.
Contact a qualified electrician or call the
Customer Service Team at 1-855-HD-HAMPTON.
6
EE
C
B
A