Converting From Blower To Vacuum - Lista ASB-20 Manual De Instrucciones

F
OPERATION
1. SWITCHING ON AND OFF (SEE FIG. G)
Press the On/off Switch to switch on. Release the
On/off Switch to switch off.
WARNING! The tool runs for a few
seconds after it has been switched off.
Let the motor come to a complete standstill
before setting the tool down.
G

2. CONVERTING FROM BLOWER TO VACUUM

For selection of the operating mode, rotate the
blower/vacuum selector lever to the correct
symbol.
Blowing mode (See Fig. H1)
Vacuuming mode (See Fig. H2)
H1
42
H2
3. VARIABLE SPEED CONTROL (SEE FIG. I)
The maximum speed of the blower/vacuum can
be altered by rotating the variable speed control to
forward or backward. You can choose 1-3 speed
to work.
I
4. USING THE BLOWER (SEE FIG. J)
The blower is intended for residential use only.
Use the blower outdoors to move debris as
needed.
CAUTION!
The blower can throw debris, possibly causing
serious personal injury to the operator or
bystanders.
•
Do not blow hard objects such as nails, bolts,
or rocks.
•
Do not operate the blower near bystanders or
pets.
•
Use extra care when cleaning debris from
stairs or other tight areas.
•
Wear safety goggles or other suitable eye
protection, long pants, and shoes.