DIAL 12000-25S-115 Manual De Instrucciones

REMOTE CONTROLLER
No.
Button
(TEMP UP)
1
(TEMP DN)
2
3
ON/OFF
FAN
4
TIMER
5
6 SLEEP
7
ECO
8 MODE
SUPER or TURBO
9
10
SWING
11 CLOCK
12 DISPLAY
13
HEALTHY
When you press "3D", the horizontal and vertical louvers will swing together at
3D
14 the same time.
15 RESET
ANTI-MILDEW
16
or
Mute
To activate the function of Mute
The out looking and some function of remote controller may be different.
The shape and position of buttons and indicators may be different according to the model, but their
function is the same.
The unit confirms the correct reception of each press button with a beep.
Function
Press to increase temperature / time setting.
Press to decrease temperature / time setting.
Press to start or stop operation.
To select the fan speed of auto/low/mid/high
Press it to set auto-off timer
To activate the function "SLEEP"
In cooling mode,press this button, the temperature will increase 2°C on the base of
setting temperature.
In heating mode, press this button, the temperature will decrease 2°C on the base of
setting temperature.
To select the mode of operation
Press this button to activate / deactivate the Super function which enables the unit to reach
the preset temperature in the shortest time.
In COOL mode, the unit will
fan speed.
In HEAT mode, the unit will
fan speed.
To activate or deactivate of the movement of the deflectors.
When you press this button, the time will begin to flash; then using the " " and
" ", you can adjust the time (the time will adjust in one minute increments;
holding the arrow button will adjust the time more rapidly), after adjusting to your
required time, please press the CLOCK button again to fix the time.
To switch on/off the LED display
To switch - on /off HEALTHY function. It is a button which controls the ionizer
or plasma genera for available model only.
To restart REMOTE CONTROLLER
To activate the function ANTI-MILDEW
or
.
give the maximum cooling temperature with 16°C,
give the maximum heating temperature with 31°C, high
7
high