Klarstein 10034440 Manual Del Usuario página 23

EN
You can overwrite the cooking times stored under the ten number keys at any time. To
overwrite a cooking program, proceed as follows:
1. In standby mode, press the PROG key.
2. Then press the X2 key.
3. Press one of the NUMBER buttons.
4. Press POWER LEVEL repeatedly and select the desired power level.
5. Then press the NUMBER buttons to set the cooking time (99:99 minutes max.).
6. Press PROG to save the program on the selected button.
Note: With the X2 function, only single-stage cooking programs can be stored.
When all settings are complete, press STOP/RESET to return to standby mode. The oven
will start after you press X2 and then the corresponding NUMBER key.
Reading the period of use
You can read the number of times the oven has been used. This function allows you to
analyze the use of the kiln and the traffic flow at a specific location where the kiln is used
commercially. To do this, proceed as follows:
1. Open the door.
2. Press and hold the STOP/RESET button, then press POWER LEVEL. The number on
the display indicates how many times the oven has been used.
Parental Lock
In standby mode, press and hold PROG for 5 seconds to activate the parental control.
Press PROG again for 5 seconds to deactivate the parental control.
23