Makita XWT14 Manual De Instrucciones página 11

Llave de impacto inalámbrica
Ocultar thumbs Ver también para XWT14:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Tool with the detent pin
Model XWT15
1
2
3
► 1. Impact socket 2. Hole 3. Square drive 4. Detent
pin
Align the hole in the side of the impact socket with the
detent pin on the square drive and push the impact
socket onto the square drive until it locks into place. Tap
it lightly if required.
To remove the impact socket, simply pull it off. If it is
hard to remove, depress the detent pin while pulling the
impact socket.
Installing hook
CAUTION:
When installing the hook, always
secure it with the screw firmly. If not, the hook
may come off from the tool and result in the personal
injury.
► 1. Groove 2. Hook 3. Screw
The hook is convenient for temporarily hanging the tool.
This can be installed on either side of the tool. To install
the hook, insert it into a groove in the tool housing on
either side and then secure it with a screw. To remove,
loosen the screw and then take it out.
4
1
3
2
11 ENGLISH
OPERATION
CAUTION:
Always insert the battery cartridge
all the way until it locks in place. If you can see the
red indicator on the upper side of the button, it is not
locked completely. Insert it fully until the red indicator
cannot be seen. If not, it may accidentally fall out of
the tool, causing injury to you or someone around
you.
Hold the tool firmly and place the impact socket over
the bolt or nut. Turn the tool on and fasten for the proper
fastening time.
The proper fastening torque may differ depending upon
the kind or size of the bolt, the material of the workpiece
to be fastened, etc. The relation between fastening
torque and fastening time is shown in the figures.
Proper fastening torque for standard bolt
N•m
(ft•lbs)
240
(177)
200
(148)
160
2
(118)
120
(89)
M12
80
(59)
40
(30)
0
1. Fastening time (second) 2. Fastening torque
M20
(3/4")
M20
(3/4")
M16
(5/8")
M16
(5/8")
(1/2")
M12
(1/2")
2
1
1

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Xwt15

Tabla de contenido