Haldex EL13220 C Serie Manual De Usario

COMPRESSOR INSTALLATION
CUMMINS C-SERIES
EL13220 EL13220X
L31050W
Rev. 1/02
THRU DRIVE MODEL
Some C-Series engines are designed to drive the power steering
pump off the rear of the air compressor.
If the existing components cannot be reused, the thru drive kit
above can be purchased from Haldex. The Bendix thru drive
adapter housing will not fit the Haldex compressor .
• ASK THESE QUESTIONS:
1. Are all water ports 1/2" NPT?
EL1300 and EL1600 are all 1/2".
2. Will additional lines and fittings be required to
relocate the governor?
3. Will additional water lines and fittings be required
for installation?
• OPTIONAL INSTALLATION CHOICES:
1. Remote mount governor.
2. Remote mount air cleaner.
3. Head can be rotated 180º.
Note:
11 tooth
coupler
SN3072BW
• CHANGEOVER MATERIALS THAT MUST BE
SUPPLIED:
1. This compressor is equipped with side discharge manifold
SN3711AH. It can be connected to the discharge line with a 1/2"
pipe to 5/8" or 3/4" tube elbow.
2. Possibly need 1/2" to 3/8" water port reducers.
3. If replacement is changed to naturally aspirated - supply plug to plug
the turbocharger port on the engine.
• CHANGEOVER MATERIAL THAT SHOULD
BE CONSIDERED:
1. For ease of changeover and extended life of the compressor use
the KN17500 series flexible Teflon discharge line kit.
2. Let the compressor breathe - use a KN19040 heavy duty filter .
3. Universal waterline kit. SN3502 to hook-up coolant lines.
• CHANGEOVER MATERIAL THAT MIGHT BE
REQUIRED:
1. Remote mount governor kit SN4011B.
2. Drive gear and drive coupler.
3. Thru drive kit.