Lista De Parámetros - Jung FMST50UP Instrucciones De Servicio

Regulador fluorescencia 1-10 V eNet 1 fase mini
6.2 Lista de parámetros
Los parámetros de dispositivo pueden ser modificados con el servidor eNet:
Device and channels
Parameters
Function
Operating mode
Advanced device settings
Parameters
Manual commissioning
Repeater mode
Channel settings
Parameters
82581023
J0082581023
Setting options, Basic set-
ting
Light, unused
Basic setting: Light
Normal operation
Continuous on
Continuous off
Basic setting: Normal Opera-
tion
Setting options, Basic set-
ting
On, Off
Basic setting: On
On, Off
Basic setting: Off
Setting options, Basic set-
ting
6/13
Explanations
Light
The channel is integrated for
the "Lighting" central function
in the eNet SMART HOME
app.
Unused
The channel is not displayed
in the eNet SMART HOME
app and is disabled for use in
the commissioning interface.
Normal operation
The output can be operated
with radio transmitters and the
Prog button.
Continuous on
The output switches to conti-
nuously "On". All operations of
radio transmitters and the
Prog button are ignored.
Continuous off
The output switches to conti-
nuously "Off". All operations of
radio transmitters and the
Prog button are ignored.
Explanations
Blocks manual commissioning
for the device channel.
Note: In the "Off" setting, the
device cannot be reset to the
factory setting.
In addition to its other func-
tions, the device can be used
as a repeater. In the "On" set-
ting, the device repeats all the
received telegrams.
Explanations
29.03.2017