Dial Mode - Geemarc Amplidect350 Manual De Instrucciones

BASIC FUNCTIONS

Dial Mode

You can select to change the dial mode by the following
steps:
1. Press the Menu soft key.
2. Press or key repeatedly to choose BS
Settings, and press the Select soft key.
3. Press the key to choose Dial Mode, then press
the Select soft key.
4. You can press or key to select the
required dial mode options (Tone/Pulse) and press the
Save soft key. A confirm beep will be heard.
Note: If you are not sure which dialing mode to select,
please contact your local service provider.
41