Geemarc Amplidect350 Manual De Instrucciones página 62

ADVANCED FUNCTIONS
4. The display shows "PIN?". Enter the current PIN, then
press the Next key. If the old PIN code is correct, you will
be prompted to enter a new PIN code, otherwise a
warning beep will sound and the handset will return to the
Modify PIN menu.
5. Enter the new PIN, press the Next key. You will be
requested to confirm the PIN code. Enter the new PIN
again then press the Save soft key to confirm and exit.
BS Reset
If you reset the base, all the features under BS Settings
menu will be restored to the factory initial setting: Dial
Mode and Flash Time.
1. Press the Menu soft key.
2. Press
then press the Select soft key.
3. Press
press the Select soft key. You will be prompted to enter
the PIN code.
4. Enter the PIN code (the default PIN is 0000), then
press the Reset soft key. If the PIN code is validated all
Base settings will be reset to the factory default,
otherwise the settings will remain.
Result: After resetting, the handset will return to standby
mode.
or key to choose BS Settings,
or key to choose BS Reset menu,
61