Pulsar ACCOLADE 2 LRF Guia De Inicio Rapido página 5

Buttons Operation
Button ON/OFF (1)
Record button REC (4)
Navigation button
UP (2)
MENU button (3)
Navigation button
DOWN (5)
Battery Pack Charging
Lift up the lever (11) of the charger (9).
•
Install the Battery Pack (9) into the charger as far as it can go.
•
Lower the lever (11).
•
Connect the micro USB plug of the USB cable (12) to the micro USB port (13)
•
of the charger.
Connect the other end of the microUSB cable to the mains adapter (14).
•
Plug the mains adapter (14) into a 100 - 240 V socket (15).
•
• Disconnect the charger from the mains after the battery is fully charged
(green LED light stays on continuously).
Lever
Battery Pack
9
Short press
Turning on device / Image
calibration
Video recording on/ pause/
continue recording video/ Take
a photo
Turning on rangefinder/
measuring distance
Access the quick menu /
Confirm selection
Change value of discrete zoom Toggle between
LED Indicator
11
12
USB cable
14
Mains adapter
Long press
Turning off device/
display
Photo mode on/ video
recording off/ video
mode on
Choose color palettes/
SCAN mode On/ Off
Log in/ out main menu
observation modes
Green LED light stays on
continuously – battery is full
Blinking red LED light –
battery is empty
Network
Micro
13 15
USB port
2
ENGLISH