Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Over Temperature Alarm
In order to avoid a the temperature problem that
could affect the quality of the beverages, the
appliance has an over temperature alarm function.
When an over temperature alarm occurs, cancel the
alarm by pressing the Cancel Alarm Key and take
out the beverage, and contact customer service.
NOTE:
In the over temperature alarm state, press the Cancel
Alarm Key to exit the over temperature alarm, the
alarm tone stops, and the light " " will change from
blinking to constant, once the appliance cools to the
required temperature.
The first boot use or a one-off drop of drinks may cause
hyperthermal alarm. This is a normal phenomenon,
and users don't worry.
WARNING
If the LED light is broken, please DO NOT
CHANGE IT YOURSELF! Changing the light
yourself may cause injury or serious
malfunctioning. It must be replaced by a
qualified service technician in order to
avoid a hazard. Contact your local Service
Center for help. Before changing the LED
light, switch off the appliance and unplug
it, or pull the fuse or the circuit breaker.

Door Alarm

The door alarm will sound once the fridge door is open
over 2 minutes. In case of door alarm, the buzzer will
sound 3 times per minute and will stop
automatically 8 minutes later. Closing the door will also
clear the door alarm.
To save energy, don't keep the door open for a long
time when using beverages cooler.
9

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido