Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Review this chart to find do-it-yourself
solutions
for minor performance
problems. Any service
needed, other than those described
in this owner's manual, should be performed
at a Sears
service center.
I
Ib WARNING
Disconnect
electrical
supply before
performing
maintenance
to the vacuum cleaner.
Failure to do so could result in electrical shock or personal
injury.
Vacumm cleaner
won'trun.
Poor job of dirt pick-up.
1. Unplugged at wall outlet.
2. Tripped circuit breaker/blown fuse
at household service panel.
3. On/off switch not turned on.
4. Thermal protector tripped.
1. Full or clogged dust bin.
2. Wrong pile heightse_ng,(somemodels)
I
I
3. Worn agitator.
4. Clogged nozzle or dust bin port.
5. Clogged hose.
6. Hole in hose.
7. Broken/misplaced belt.
8, Hose not inserted fully,
9, Motor protection system activated.
10. Dirty filters.
1.
Plug in firmly, push on/off switch to on.
2.
Reset circuit breaker or replace fuss.
3.
Push on/off switchto on.
4.
Reset thermal protector,
1.
Clean dust bin,
2.
Adjust setting.
3.
Replace agitator.
4.
Check CLOG REMOVAL.
5.
Check for clogs.
6.
Replaca hose.
7.
Replace/fix belt.
8.
Insert hose fully.
9.
Check for clogs.
10.
Clean/change filters.
Vacuum cleaner picks up
1. Wrong pile heightsetting.(some models
t.
Adjust setting.
moveable rugs or
pushes too hard.
Agitator does not turn.
1. Brokenbelt.
1.
Replace belt.
2. Belt installedincormcfiy.
2.
Check BELT CHANGING AND
AGITATORCLEANING.
Performance Indicator,
1. Fullor clogged dust bin.
1.
Clean dust bin.
some models, is red.
2. Dirtyfilters.
2.
Clean/change filters.
3. Clogged airflowpassage.
3.
Clear clogfrom airflowpassage.
4. Certain attachmenttools.
4.
This is normal.Lightshouldgo off
when toolis removed.
Air flow restricted
1. Attachment use restricts air flow.
1.
Check ATTACHMENTS.
with attachment use.
2. New carpet fuzz cloggedair path.
2.
Check CLOG REMOVAL and clean
Sound changes,
hose.
2O
Publicidad
Tabla de contenido
