Alarm Button - XtremeMac Luna Voyager Guia Del Usuario

To control display brightness
Press and hold the clock button and rotate the control wheel to
control the display brightness – rotating the control wheel counter
clockwise will dim the display and rotating the control wheel
clockwise will brighten the display.
Note: The display will turn all the way off – to turn back on, press and hold the clock
button while rotating the control wheel clockwise.
Inserting and removing dock adapters
1. Select the appropriate dock adapter for your device by turning
over the adapter and looking at the bottom left corner for the
name of the device for compatibility.
2. Gently press the adapter into place until you hear a click,
which indicates it has been locked into place.
3. To remove the dock adapter, use a flat item like a letter opener
or a flat head screwdriver and insert it into the slot behind the
dock connector and gently pull upward.
Listening to your iPod/iPhone
1. Use the insert designed for your iPhone or iPod and gently
press it into the universal dock well.
2. Carefully place your device into the dock well.
3. Press the play/pause button on the top of the unit (this is
also the clock button) or press play on the device and use the
control wheel to adjust the volume.
QUIck gUIDe FoR UsIng tHe contRoLs

aLaRM BUtton

When alarm is not sounding
Press once to get into alarm activation mode. Once in this mode,
the display will show the alarm time. Pressing the alarm button in
this mode will toggle between selecting the source – iPod or buzzer
and turning the alarm off.
When alarm is sounding
Press once to turn the alarm off and reset for the following day.
10
contRoL WHeeL
When alarm is sounding
Rotate the wheel when alarm is sounding to snooze the alarm. The
snooze is set for 10 minutes.
When iPod is playing
Use the control wheel to adjust the volume.
To set the time
Press and hold the clock button and use the control wheel to
adjust the time.
To control display brightness
Press and hold the clock button and rotate the control wheel to
control the display brightness - rotating the control wheel counter
clockwise will dim the display and rotating the control wheel
clockwise will brighten the display.
Note: The display will turn all the way off - to turn back on, press and hold the clock
button while rotating the control wheel clockwise.
tIMe anD HoUR MoDe sWItcHes
Auto Time Set Switch
This switch is located on the back of the unit and marked as
SET|AUTO. If you set it to AUTO and then dock your iPhone or iPod,
the unit will automatically set the time from the device.
12/24 Hour Mode Switch
This switch is located on the back of the unit and marked OFF | 12|
24. Set the switch to 12 for 12 hour clock mode or 24 for 24 hour
clock mode depending on your preference. If this switch is set to
OFF, the unit will be turned off for travel mode. It will hold time
and alarm settings if there are 2 "AAA" batteries in the unit.
Note: You will need to select 12 or 14 hour mode to turn on the device.
11