Product Setup - D-Link DUB-M910 Guía De Instalación Rápida

PRODUCT SETUP

Step 1:
Plug the DUB-M910's USB Type-C connector into an available USB Type-C
port on your computer.
Step 2:
Connect a HDMI or VGA cable to the DUB-M910's respective port.
Step 3:
Attach the other end of the cable to the respective port on your display.
Step 4 (Optional):
Connect up to two USB devices to the USB 3.0 ports. You can also use the
respective USB Type-C ports to charge your USB Type-C device or to deliver
power to your laptop. Use the dual-slot card reader to access data on a SD or
microSD card simultaneously.
Regarding Windows 10, 8; Mac OS 10.11.6 and above:
No configuration or driver installation is necessary to use the Ethernet port.
Regarding other operating systems:
Visit the link below to download the RTL8153 software to use the Ethernet port.
https://www.realtek.com/en/component/zoo/advanced-search/72?Itemid=276
HDMI
VGA Port
USB Type-C
(Data Sync)
2
USB-C
(Power Delivery)
Ethernet
SD/microSD USB 3.0
Card
USB-C
Connector
USB 3.0
with BC 1.2
DUB-M910