Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Note:First the direction sign
. It indicates the meter is under resetting process. Finally if the reset process is completed, the target
angle will be shown. For example
Caution:
During resetting process, never vibrate or shake the meter. Keep it rest.
- The meter will auto power off after about 2 minutes idle for power saving.
Caution:
During communication period (
- Press
for zero reset.
- Usually press
a better accuracy.
Caution:
1. During resetting process, never vibrate or shake the meter. Keep it rest.
2. If
shows. Refer to "ERROR MESSAGE" section.
- To do hardware rest, use a pin to touch the reset button which is located in the hole of the
meter back.
- Another way is remove battery and re-install it.
- If the meter does not work functionally, please do hardware reset.
or
AUTO POWER OFF
appears), the auto power-off function is disabled.
to zero reset the digital angle meter before using the meter. It will guarantee
HARDWARE RESET
will show .Then the LCD shows
is shown.
ZERO RESET
17
Publicidad
Tabla de contenido
