Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Step 1:PUT THE METER ON THE WRENCH
Step 2: POWER ON THE METER AND RESET
- Press
to power on the meter or reset it.
- Finally the current target angle will be shown.
- Make sure the direction. If you want to change to direction, please refer to "CHANGE ANGLE
DIRECTION"
Step 3: SET TARGET ANGLE
- Press
to select the pre-set target angle (M1~M9).
- Or press
or
to modify the current target angle. Note that the target angle will be saved
automatically with the current M number.
19
Publicidad
Tabla de contenido
