Additional Information - SCS KW9025 CC Manual De Instalacion Y Uso

RECORDING MAX. AND MIN. TEMPERATURES
This device records and shows the maximum or minimum outside or indoor temperatures as
well as the degree of humidity
• Press «MAX/MIN» (B2), ''MAX'' appears and the indoor and outside maximum temperatures,
as well as the maximum degree of humidity (recorded) are displayed.
• Press «MAX/MIN » (B2) again, ''MIN'' appears and the indoor and outside minimum
temperatures, as well as the minimum degree of humidity (recorded) are displayed
• Press and hold «MAX/MIN» (B2), for 3 seconds to delete the MAX/MIN values recorded
OUTSIDE TEMPERATURE WARNING
• Press and hold «ALERT» (B1), for 3 seconds to set the warning temperature: the
indoor temperature displays ''--'' and begins to flash.
• Press (B5) or
or outdoor temperature on channel 1, 2, or 3. When you have made your choice,
press "ALERT" (B1) to confirm. Press
temperature limits
• If it is enabled, then the following symbol

ADDITIONAL INFORMATION

• Always read the instruction manual carefully before carrying out an operation on the product
• Press the RESET button with a sharp point if the unit is not working correctly
• Avoid placing the unit near sources of interference/metal structures such as a computer or
a television set.
• The unit will lose the information on the time when the batteries are changed.
• Do not expose the parts to excessive direct sunlight. The sensor can withstand being
splashed with water. Never immerse in water or expose them to large quantities of rain.
• Do not clean the product with an abrasive or corrosive product. Such products can scratch
plastic parts and damage electronic circuits.
• Do not dismantle. Any such handling can damage the unit and result in the warranty
becoming null and void
SCS KW9025 CC + KW9010 notice.indd 18
(B6) to select whether the warning will be given for the indoor
(B5) or
ENGLISH
(B6) to set the upper and lower
appears on the display.
8
9
10
P 18
10/08/2010 08:44:56