Maintenance - Klarfit Stuntz Manual De Instrucciones

3
Slide the handlebars onto the head
tube until they touch the head tube
nut.

MAINTENANCE

• Check the numerous components of the device which are fixed by screws,
as these can become loose during use.
• Replace defective components with original spare parts only.
• Remove any sharp fragments resulting from the use of the unit.
• Store the scooter in a dry and dust-free place.
• Do not modify or alter the scooter.
• Check the condition of the ball bearings and wheels regularly and replace
them if necessary.
4
Tighten the two Allen screws on the
handlebars with the Allen key.
EN
13