User Instructions - EASYHOME VC9385S Manual Del Usuario

Carpet Cleaner

USER INSTRUCTIONS

ASSEMBLY
 Insert handle into the Carpet Cleaner. Insert a screw into
the hole on each side of the handle. Tighten screws.
Helpful Things to Think About Before Carpet Cleaning:
 Before cleaning, determine where to start and end, making sure not to walk over
previously cleaned area.
 Do not over saturate carpet with cleaning solution while using Carpet Cleaner.

For heavily soiled areas, additional applications may be necessary.
 Allow plenty of time for carpet to dry completely.
 Wipe cleaning solution from woodwork and wood to prevent damage.
 Vacuum the carpet thoroughly and remove as much furniture from the room as
possible. For remaining pieces place foil or plastic under furniture legs until the carpet
has completely dried.
 Check for color fastness before cleaning your carpet. Dampen a white cloth with the
cleaning solution and test a small inconspicuous area. Gently rub over the area and
all colors in the carpet. If the white cloth remains clean it should be safe to clean
your carpet.
 NOTE: You may use any carpet cleaning solution available at your local retail or
hardware store. Pay close attention to the amounts that should be used.
 DO NOT use any chemicals on your carpeting. Only approved carpet cleaning
solutions.
To Begin
1. Hold the handle and lift up on clean water release lever and left the water tank
away from the cleaner. Unscrew the tank cap from the bottom of the tank, add 2
teaspoons of cleaning solution (or recommended amount on cleaner solution bottle)
and fill the remainder of the tank with warm tap water. Do not fill past the MAX fill
line.
2. Place the bottom of the tank into the Carpet Cleaner and snap into place.
6
_______________ _________
AFTER SALES SUPPORT / SERVICIO DE POSTVENTA
888-367-7373
MODEL: VC9385S
____USER INSTRUCTIONS
customer-service@wk-usa.com
PRODUCT CODE: 4366 03-2015