CLEANING AND CARE
Motor unit
Never immerse the motor unit in water or any other liquid. Wipe it clean with a
lightly moist cloth.
Assembled Jar
Empty jar and fill it water, tightly close it with the plastic lid, place it on motor unit
and turn it on several times with pulse setting. Empty the jar and rinse it until
clean.
Deep cleaning
Empty jar and disassemble it unscrewing the jar holder from the body (handle
blades with caution, they are very sharp). All parts are dishwasher safe or can e
washed by hand with soap and water.
NOTE: the motor has over-temperature protection; it will stop automatically
when reaches 105 ºC of temperature, the motor will not start working again until
cools down.
5