Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING GUIDE
Phenomenon
The machine
suddenly stops
working.
Turn the speed
knob and the
machine does
not work.
Machine or
motor sound in
motion.
Motor speed
down.
Motor unstable.
Motor does not
work.
SPECIFICATIONS
Voltage:
220-240V~
Frequency: 50-60Hz
Power:
800W
Rated power input for: Blender – 800W
Capacity for metal bowl: 4.8L
Capacity for blender: 1.5L
Reason
Whether the machine is
running too long or the
temperature is too high,
resulting in motor
overheating, and power
failure.
Whether the power
failure.
Whether the head is
locked.
Whether the plug is
plugged into the socket.
A loud increase in speed
or load during a
mechanical operation.
Whether it is used in low
temperatures and it will
harden the oil in the
machine; whether the
mix will cause the motor
to load too much.
Beater – 350W
Mincer – 250W
EN-17
Methods
Turn the speed control
knob to "OFF" and remove
the power plug until the
machine is completely
cooled.
Operate after incoming
electric.
Let the front of head in a
horizontal position.
Be sure that the plug is
plug into socket.
May overload or use too
long, please adjust the
amount of mixture and rest
after use.
No-load 5 minutes to
loosen the mechanism
and stabilize the speed.
Reduce the amount of
agitation and reduce the
load. And turn the speed
to the low position.
Publicidad
Tabla de contenido
