Descargar Imprimir esta página

Helvex UMO8-DC-01 Guia De Instalacion página 2

Publicidad

Unscrew the connectors and the nut,
remove the washer and the separator.
Desenrosque los conectores y la tuerca,
remueva la rondana y el separador.
separator
connectors
conectores
Open the water supply and purge the supply lines.
el suministro de agua y purgue la línea de alimentación.
supply lines
líneas de
alimentación
hot water
agua caliente
Operation / Operación
Open the water supply line
/ Abra el suministro de agua.
cold
fría
hot
caliente
Check for leaks above and below the
sink. /
Revise que no existan fugas
encima y debajo del lavabo.
Insert the faucet into the sink and
check that the o'ring is placed.
/
la salida en el lavabo y verifique que
se coloque el o'ring.
/ Abra
cold water
agua fría
Insert the separator and the washer.
Screw the nut to fix and screw the
/ Inserte
connectors.
rondana. Enrosque la tuerca para fijar y
enrosque los conectores.
washer
rondana
connectors
conectores
Screw the hoses (not included) to the connectors and then to the
supply line.
/ Enrosque las mangueras (no incluidas) a los
conectores y posteriormente a la línea de alimentación.
connectors
conectores
supply lines
líneas de
alimentación
To open and close the water flow, move the handle up and
down. To adjust the water temperature, turn clockwise for hotter
and counterclockwise for colder.
agua, levante y baje el maneral. Para regular la temperatura,
gire a la izquierda para más caliente y a la derecha para más
fría.
/ Inserte el separador y la
separator
separador
nut
tuerca
hoses
(not included)
1/2"-14 NPSM x 1/2"-14 NPSM x 24"
mangueras
(no incluidas)
Apply plumber´s tape on the
threaded connections, in order
to prevent leaks.
Coloque cinta teflón en las
conexiones roscadas para
evitar fugas.
/ Para abrir y cerrar el flujo de

Publicidad

loading