Especificaciones - EcoxGear EcoSlate GDI-EXSLT800 Manual De Instrucciones

Back Panel: Functions
Master Power Switch
EcoSlate has a separate Master
Power Switch and a Standby
Button. The switch MUST be
set to the ON position to power
your EcoSlate. Once the switch
is set to ON, use the Standby
Button located on the top panel
to turn the unit On/Off.
NOTE: When not in use for
extended periods, turn the
Master Power off topreserve
battery life.
IMPORTANT: Standby Power
function will NOT operate when
the Master Power is set to OFF.
Audio AUX-IN
Connect an audio device using
the 3.5mm cable connection
as an alternative to a Bluetooth
connection to your EcoSlate.
NOTE: Volume level must
be controlled from the audio
device when connected to the
AUX-IN connection.
Input
Connect the USB cable to the
USB micro Input to charge
your EcoSlate.
RECOMMENDATION: Use
theUSB cable and power
adapterincluded in the box.
NOTE: Charge time from low to
full charge is approx. 3 hours.
While playing audio, EcoSlate
can be charged or charge your
device. Battery play time shall
be reduced depending on the
time and size of the device
charging while connected to
your EcoSlate.
CAUTION: Do NOT charge
if
unit and/or connections are
wet or damp.
Output
Connect to the USB Output
(5V, 1A) port to charge your
personal device. Use the
USB cable included with your
personal device.
NOTE: Charging rates are
similar to the charging rate
when connected to the USB of
a desktop PC.
Charge time is approx. 3 hrs.
from low to full for most
Smartphones; however,
charge
times will vary depending on
the device being charged, the
device's battery specifications,
and the device features.
In some instances your
personal device may not
indicate if charge is in process.
CAUTION: Do NOT charge
ifunit and/or connections are
wet or damp.

Especificaciones

Punto de acoplamiento del montaje
Dimensiones
de la unidad
223 mm
Peso de la Unidad
833 gramos
Potencia de Salida
RMS 20W (10 Watt x2 altavoz/
4 ohms), x2 woofers (3"x1.5")
Relación Señal/Ruido
88dB +/- 3dB
Fuente de Alimentación
Pila de litio de 3,7V, 2600mAh Tiempo de Carga
Entrada USB/Salida
5V, 1A
Rango de Frecuencia
125Hz-18,000Hz
Alcance Bluetooth
Bluetooth® CSR 4.1
Hasta 30 m / 100 ft
Alcance EcoConnect
TrueWireless Stereo
(TWS)Hasta 9.1 m / 30 ft
entrepares altavoces
Tiempo de Reproducción
12+ horas con carga llena a
75%de nivel de volumen
Linterna
139 mm
57.9 mm
Punto de Acoplamiento
a Montaje
¼" diametro
Linterna LED
200 Lumens
Opciones de Carga
Adaptador CA (5V, 1 A) USB
paratoma en la pared o computadora
Aproximadamente 3 horas
Temperatura de
Almacenamiento
Recomendada (Pila)
15°C / 59°F
Temperatura de Operación
-5°C hasta 40°C /
23°F hasta 104°F
Certificación Militar
de Estados Unidos
MIL-STD 810G
Clasificación de
impermeabilidad/Antipolvo
IP68