Publicidad
SAFETY INSTRUCTIONS
WARNING: Risk of flying particles .
• Use of damaged hand tools, sockets, extensions
and accessories may result in injury do not use
torque screwdriver as a hammer torque
screwdriver not in calibration may cause damage
to parts or tools do not use extensions on hadle as
a damage to torque screwdriver will result to
avoid "side load" ocurred with inaccurate torque
readings, please keep torque screwdriver vertical
to the flat of use.
NOTE: Always use aye protection while using hand
tool.
WARNING
Injury may result from electrical shock.
• Handle is not insulated, do not use on live
electrical or high valtage circuits.
CARE AND MAINTENANCE
1. The torque screwdriver is a precision
instrument, and should be stored with care.
Don't throw it around, use a hammer with it.
2. The torque screwdriver is lubricated for life
should not be oiled. The only exception is the
ratchet head which may be lubricated as needed
for smooth operation.
3. The torque screwdriver is a precision measuring
instrument. Calibration must be done regularly to
ensure accuracy and it's the owner responsibility.
Suggested calibration period is at least every 12
months or even shorter depending on the
operation.
4. Always store the torque screwdriver in the box
after use to stay away from dirt and humidity.
5. Never disassemble the torque screwdriver by
yourself. For any need to disassemble the torque
screwdriver or repair it, please look for assistance
from qualified service station. Any incorrect action
E N G L I S H
Publicidad
