Installation Steps - Axis 231D+ Guia De Instalacion

AXIS 231D+/232D+ Installation Guide
AXIS 231D+/232D+ Network Dome Camera
This installation guide provides instructions for installing the AXIS 231D+/232D+ Network
Dome Camera on your network. For all other aspects of using the product, please see the AXIS
231D+/232D+ User's Manual, available from www.axis.com

Installation steps

Follow these steps to install the AXIS 231D+/232D+ on your local network (LAN):
1. Check the package contents against the list below.
2. Connect the camera. See page 4 and page 5.
3. Set an IP address. See page 5.
4. Set the password. See page 13.
Package contents
Item
Network Dome Camera
Connection Module
Connection Module Cable
Indoor Power Supply with
power cable
Mounting Kits
This document
Warranty Document
Optional accessories are available for mounting on ceiling, wall, corner and pole, for both
indoor and outdoor use. For more information, please visit the Axis Web site at
http://www.axis.com
Before you begin:
If the AXIS 231D+/232D+ is to be mounted in a position where it is difficult to access, it is
recommended that you set the IP address and get the camera up and running before
completing the hardware installation.
Installation Guide
Title/Variants
AXIS 231D+/232D+
Europe
UK
Australia
USA/Japan
Korea
Hard Ceiling Mount for Indoor Use
Drop Ceiling Mount for Indoor Use
AXIS 231D+/232D+ Installation Guide
The power supply is country
specific, please check that the
type of power supply you are
using is correct.
Page 3