Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
Problem
If the pump does not run
If hose is blocked.
WARRANTY
• 1 Year warranty against manufacturer's defect in materials & workmanship. The manufacturer
warranty will be voided by, and manufacturer disclaims any responsibility for, the following actions:
• Modification of the unit and/or components.
• Use of any component part not manufactured or approved by manufacturer.
• Use and installation other than as instructed in this manual.
Please contact the manufacturer for replacement parts.
CUSTOMER SERVICE
If you have any questions or concerns, please contact Bond Manufacturing Co., Inc. at the below
resources:
Toll Free Phone
1-866-771-BOND (2663) | Monday - Friday, 8am - 4:30pm PST
Email
customer.service@bondmfg.com
Online
bondmfg.com
Help available in English and Spanish.
Check the circuit breaker or try another outlet.
Check the water level in the fountain. Running the pump without suffi-
cient water can damaged the pump.
Check the setting of the flow control on the pump and adjust the flow.
Check the pump discharge and intake for dirt and debris.
The pump might be "air locked." Plug and unplug the pump several
times to release the air inside the pump.
Check and reconnect the cord and try again.
9
Solution
Publicidad
Tabla de contenido
