ASROCK Z590 Extreme WiFi 6E Manual Del Usuario página 11

Graphics Card Holder
Installing the Graphics Card Holder
Before installing the Graphics Card Holder , please make sure that your motherboard is
properly installed into a PC case.
Type A Type B
Step 1
Secure the Graphics Card Holder to the chassis
with 2 screws.
*There are two types of screws in the package.
Please use the appropriate type based on the
standoffs on the motherboard tray of your PC
case.
Step 2
After installing your graphics card, place the
bracket in the proper position to make sure that
it holds your graphics card in place.
Then secure the bracket to the Graphics Card
Holder with 1 screw.
Z590 Extreme WiFi 6E
7